电池安全性检测设备 -> 电池针刺试验机
试验应在20℃的环境温度下进行，将接有热电偶的电池（热电偶的触点固定在电池大表面上）置于通风橱中，用直径2~8mm的无蚀锈钢针以10mm/s~40mm/s的速度 刺穿电池最大表面的中心位置，并保持任意时间。
The test should be carride out in the environment at 20℃. Put the battery connected to thermocouple (with contacts fixed to th large surface of the battery) in the hood, penetrate the of the largest surface of the battery with 2~8mm diameter stainless steel needle at 10~40mm/s speed, and maintain any time.
符合标准
-
GB/T 31241
-
GB/T 31486-2015
-
GB/T 31485-2015
-
GB/T 31484-2015
-
GB/T 31467.1-2015
-
GB/T 31467.2-2015
-
GB/T 31467.3-2015
-
QC/T 741-2014等
技术参数 Technical parameter(ψ2mm~ψ8mm的耐高温钢针，长度可根据客户要求定制)
|
设备型号 Equipment
|
测试空间 Test space(mm)
|
|
型号 Mode
|
HBT-ZC-1
|
|
针尖距离下部距离
|
放电池的平面200m Plane for the battery is 200mm
|
|
可夹距离
|
200mm
|
|
针刺速度
|
以10~40mm/s的速度，从垂直于蓄电池极板的方向贯穿（钢针停留在蓄电池中） Penetrate in the direction perpendicular to the battery plate at 10~40mm/s speed (needle stays in the battery)
|
|
最大贯穿力 Maximum penetration force
|
200kg
|
|
力量显示 strength display
|
压力传感LED显示 Pressure sensor LED display
|
|
行程 Stroke
|
200mm
|
|
驱动方式 Drive
|
气缸驱动 Cylinder dirve
|
|
夹持方式
|
手动夹持或拨动夹持 Manual or pneumatic clamping
|
|
箱体结构 Box structure
|
做成箱式设备装置防爆、防火、抗腐蚀、易清理 Made into box-type equipment, explosion-proof, fireproof, corrosion-resistant, easy to clean.
|
|
防爆箱材质 Material of explosion-proofbox
|
镀锌板烤漆处理 Galvanized plate baking varnish processing
|
|
重量 Weight
|
约(about) 75kg
|
|
电源要求
|
1ψ 220V/50Hz
|
